Does my Sarasota business need a dedicated circuit for signage?

Yes. NEC 600.5(A) requires at least one dedicated 20-amp branch circuit for sign power at every commercial occupancy, even if no sign is currently installed. This requirement ensures that future sign installations have a ready power source without overloading other circuits. When we perform commercial build-outs, we always include the required sign circuit as part of the base electrical scope.

What kind of disconnect switch does my business sign need?

NEC 600.6 requires a listed disconnect switch located within sight of the sign and within 50 feet. For exterior signs, this is typically a weather-rated fused disconnect or non-fused switch mounted on the building exterior near the sign location. The disconnect allows sign service technicians to safely de-energize the sign without accessing the electrical panel inside the building.

Can you power a sign on the street side of my building if the panel is in the back?

Yes. We route the dedicated sign circuit from your panel through the building to the sign location, often running through the attic, above a drop ceiling, or along the exterior in weatherproof conduit. For monument or pylon signs away from the building, we run underground conduit from the building to the sign base, including a disconnect switch at the sign per NEC 600.6.

How do I automate my business sign to turn on and off?

We install a photocell sensor or astronomical timer on the sign circuit so the sign illuminates automatically at dusk. If you want the sign to turn off at a specific time (e.g., midnight) rather than running until dawn, a combination timer/photocell provides both dusk-on and time-off control. Smart controls add the ability to adjust schedules from your phone and receive alerts if the sign circuit loses power.

Does Majors Electrical install the signs themselves?

Our scope covers the electrical infrastructure—circuits, disconnects, controls, and wiring to the sign location. The physical sign fabrication and mounting are typically handled by a sign company. We coordinate directly with your sign manufacturer to ensure our electrical rough-in matches their connection requirements, and we perform the final electrical connection once the sign is mounted.

Signage Power
in Sarasota & Tampa Bay

Light up your brand. Professional, code-compliant installation and repair by your local electrical experts.

(941) 320-9868 Get a Free Quote

5.0/5 Rating

Licensed & Insured

~5 min read

Free Estimate

Get a Quote for Signage Power

Fill out the form below and our team will get back to you within 24 hours.

Local Signage Power Experts

Illuminated business signage is your Sarasota storefront's most visible marketing asset—and it requires properly installed, code-compliant electrical power to operate safely and reliably. Majors Electrical provides the complete electrical infrastructure for illuminated signs, including dedicated circuits, time clock and photocell controls, disconnect switches per NEC Article 600, and coordination with sign manufacturers on voltage and amperage requirements.